Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals
 
 Booth Greases
   E-Coat Cleaners
   Oven Cleaners
 
 Paint Booth Cleaning
   Paint Line Cleaners
   Protective Booth Coatings
   Peelable Booth Coatings
 
   Thickened Paint Strippers
 
   Tacky Booth Coatings
 
General Chemicals Corp
12336 Emerson Dr.Brighton
Michigan (MI) 48116, USA
USA: 866-623-5600
Overseas: 428-587-5600
Fax: 248-587-5600

Email:
Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals
Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals
 
 
OC 1493 OVEN COATING:
 
solvent based, high temperature tacky coating, tacky oven coating, paint booth maintenance PRODUCT DESCRIPTION:
 
  Tacky Oven Coating 1493 is a polymeric based coating, formulated for use in high temperature paint ovens. This product is applied to aluminum foil or aluminum trays on oven floors to trap air borne particulates that may otherwise be deposited on freshly painted surfaces. Tacky Oven Coating 1493 remains tacky for extended periods of time at temperatures up to 325 °F. This material is easy to use and contains no HAP or SARA reportable.  
solvent based, high temperature tacky coating, tacky oven coating, paint booth maintenance TYPICAL PROPERTIES:
 
Appearance: Clear viscous liquid
Flash point: 105°F (TCC)
Wt/gal: 6.6 - 6.8 lbs/gal
VOC: 4.7 lb/gal
 
solvent based, high temperature tacky coating, tacky oven coating, paint booth maintenance RECOMMENDED APPLICATION:

Tacky Oven Coating 1493 is most effective and retains its intended tack life when applied to aluminum foil, aluminized panels or shallow, fabricated aluminum trays placed in the bottom of the oven. Application to steel surfaces tends to shorten the tack life of the coating.

After coating application, gradually bring the oven up to operating temperature with the exhaust fans running.
Tacky Oven Coating 1493 can be applied by brush, spray or roller. Airless spraying is the preferred method of application. It is used as received, no dilution is needed.

Tacky Oven Coating 1493 can be applied with airless spray equipment. A 0.035” or larger fluid orifice in the spray gun should be used. Equipment should be cleaned and flushed with mineral spirits after application.

solvent based, high temperature tacky coating, tacky oven coating, paint booth maintenance CAUTION:

Airless equipment can be extremely hazardous. It is recommended that all precautionary information regarding the operation of an airless gun be read, understood, and followed.

solvent based, high temperature tacky coating, tacky oven coating, paint booth maintenance SURFACE PREPARATION:

The surface to be coated should be clean and relatively dry for best adhesion of the coating.

solvent based, high temperature tacky coating, tacky oven coating, paint booth maintenance APPLICATION:

Tacky Oven Coating 1493 should be sprayed in a uniform film of 10-mils to 15-mils wet thickness which will provide a recommended dry film of 3 to 5 mils. Do not exceed 30 wet mils.

solvent based, high temperature tacky coating, tacky oven coating, paint booth maintenance REMOVAL:

If applied to aluminum foil, periodically roll up the foil being careful to contain any particulates on the surface. Dispose of the foil as solids waste. Clean-up of equipment or spills can be made with mineral spirits. Tacky Oven Coating 1493 can also be removed by raising the oven temperature to 450 to 500 °F. At this temperature the coating decomposes to carbon dioxide and water.

solvent based, high temperature tacky coating, tacky oven coating, paint booth maintenance STORAGE:

Tacky Oven Coating 1493 should be stored where the temperature will not exceed 80 °F.

NOTE: Although Tacky Oven Coating 1493 should not cause paint defects on parts entering the paint oven, test panels should be run to verify the compatibility of the coating with the particular paint and process involved using the product in production. Compatibility should be retested any time the paint or process is changed.

solvent based, high temperature tacky coating, tacky oven coating, paint booth maintenance PRODUCT ADVANTAGES:

solvent based, high temperature tacky coating, tacky oven coating, paint booth maintenance High temp effectiveness
solvent based, high temperature tacky coating, tacky oven coating, paint booth maintenance Easy to use
solvent based, high temperature tacky coating, tacky oven coating, paint booth maintenance Self cleaning
solvent based, high temperature tacky coating, tacky oven coating, paint booth maintenance No HAP or SARA reportables

 
     
  Note: The above information and recommendations concerning this product are based upon our laboratory tests and field use experience with this or similar products. However, since conditions of actual use are beyond our control, any recommendations or suggestions are made without warranty, express or implied. Manufacturer's and seller's sole obligation shall be to replace that portion of the product shown to be defective. Neither shall be liable for any loss, damage, or injury, direct or consequential, arising out of the use of this product. The information presented herein is our interpretation of certain test results and field experience to date. This information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification.  
     
  Terms & Conditions | Privacy Policy | Links | Warranty | Sitemap | PRESS RELEASE | FAQ'S | DISTRIBUTOR OPPORTUNITY | PRIVATE LABEL  
  COPYRIGHTS @ 2010 STRIPPABLE COATINGS . ALL RIGHTS RESERVED